Electrostatic Precipitator Dry Scrubber for Kitchen Exhaust

The Electrostatic Precipitator Dry Scrubber for Kitchen Exhaust is a highly efficient industrial product made of metal that operates on electric power. It is available in various sizes and consumes power between 220-440 Volt (V), making it a versatile option for commercial kitchens of all sizes. This product is designed to remove oil, grease, and smoke particles from the kitchen exhaust, thus ensuring a clean and healthy environment for the kitchen staff. The Electrostatic Precipitator Dry Scrubber for Kitchen Exhaust is an electrostatic precipitator that uses a high-voltage electric field to charge the particles, which are then attracted to a collection plate of opposite polarity. The Dry Scrubber technology further purifies the exhaust by utilizing a cyclonic chamber, which removes the moisture and other impurities. This product is a must-have for all commercial kitchens, as it not only reduces the risk of fire but also ensures compliance with environmental regulations.

Supply,  installation,  testing  and  commissioning  of  Dry Air Scrubber  each  comprising  match of electrostatic  precipitation technology, dry type   air  cleaner  to remove  oil, dumbs, smoke and fumes from exhaust air, as per the Specifications.

Electrostatic Precipitator Cabinet (i.e. Body)  shall  be  made  of  14  gauge(1.6mm)  MS CRCA (Mild Steel Cold Rolled Close Annealed)  sheet, Air leak Proof, Weather Proof, outdoor unit confirms to  Ingress Protection standard and Electro Powder coated with 7 tank treatment Process, washable type aluminum mesh pre filters with SS304 frame,   Ionizing- Collecting cell(s) shall be of one-piece construction minimum 16" inches deep in  direction  of  airflow. All support framing 0.039", end plates 0.062", ionizer 0.039" and Both repelling and collector plates shall be 0.031" inch thick aluminum and rigidly retained in place with tubular spacers and tie rods. Ionizing electrodes shall be heavy duty and non-breakable rigidly supported both vertically and laterally. High voltage support insulators shall be of made of Teflon, glazed to enhance dielectric strength and retard tracking. Insulators shall be mounted out of the air stream, to reduce contaminant buildup. All high voltage electrical connections within each tier of cells, shall be between cells and automatically made when cells are installed.  Average efficiency of 90%   for single pass test based on ASHRAE MERV at flow rates of 800 -1500CFM per module. Power supplies shall be 100% solid state CE Listed and Pulse width modulation (PWM) based design The system should be fitted with interlock switch for  safety. The  system  should  allow  connection   to  a  fan section in Bidirectional configuration method of ESP unit installation and should conform to necessary electrical & fire safety standards

All units should have Arc Suppression & Auto Restart, Performance Indicator Lights to indicate the status of the air cleaning system. Power Consumption should not be more that 50 watts per ESP cell.

Operating Voltage :  220V, 50 Hz Ionizing Voltage : 12.5 to 13 KVDC Collector Cell Voltage : 6 to 6.5 KVDC and the ESP unit shall have necessary BMS connectivity features. 

FAQs of Electrostatic Precipitator Dry Scrubber for Kitchen Exhaust: